[C語言]C File(檔案)處理 OPEN / FOPEN

[Open]

#include  //fcntl.h - file control options

Open 有兩種型態 : 

int open(const char *path, int oflags);
int open(const char *path, int oflags, mode_t mode);

以下範例表達 : 
int fd;//宣告int型態的file open狀態容器
char buff[1024];
打開的用法fd = open("filename", 權限);
//filename 在Linux driver中，通常是上層用來做device node的開啟 ->   /sys/..../device_node
假設開啟成功 fd = 0 ,如果失敗 => 小於0 或負數(返回值：成功return 0，出現錯誤return -1並設置errno)

write(fd, );
1 = read(fd1,buff,sizeof(buff))) > 0);
//read 等於1 代表大小大於0‧ 還有值 可以繼續讀取，通常用於while迴圈‧
close(fd); //(返回值：成功return 0，出現錯誤return -1並設置errno)

權限一覽表 : 

O_RDONLY
開啟檔案(唯讀).
O_WRONLY
開啟檔案(唯寫).
O_RDWR
開啟檔案(可被讀跟寫).
O_APPEND
Append new information to the end of the file.
O_TRUNC
Initially clear all data from the file.
O_CREAT
如果未存在這個檔案，那就建立這個檔案‧
O_EXCL
Combined with the O_CREAT option, it ensures that the caller must create the file. If the file already exists, the call will fail.

reference : http://www.thegeekstuff.com/2010/10/linux-error-codes

ERROR CODE TABLE(errno table)
Error number	Error Code	Error Description
1	EPERM	Operation not permitted
2	ENOENT	No such file or directory
3	ESRCH	No such process
4	EINTR	Interrupted system call
5	EIO	I/O error
6	ENXIO	No such device or address
7	E2BIG	Argument list too long
8	ENOEXEC	Exec format error
9	EBADF	Bad file number
10	ECHILD	No child processes
11	EAGAIN	Try again
12	ENOMEM	Out of memory
13	EACCES	Permission denied
14	EFAULT	Bad address
15	ENOTBLK	Block device required
16	EBUSY	Device or resource busy
17	EEXIST	File exists
18	EXDEV	Cross-device link
19	ENODEV	No such device
20	ENOTDIR	Not a directory
21	EISDIR	Is a directory
22	EINVAL	Invalid argument
23	ENFILE	File table overflow
24	EMFILE	Too many open files
25	ENOTTY	Not a typewriter
26	ETXTBSY	Text file busy
27	EFBIG	File too large
28	ENOSPC	No space left on device
29	ESPIPE	Illegal seek
30	EROFS	Read-only file system
31	EMLINK	Too many links
32	EPIPE	Broken pipe
33	EDOM	Math argument out of domain of func
34	ERANGE	Math result not representable
35	EDEADLK	Resource deadlock would occur
36	ENAMETOOLONG	File name too long
37	ENOLCK	No record locks available
38	ENOSYS	Function not implemented
39	ENOTEMPTY	Directory not empty
40	ELOOP	Too many symbolic links encountered
42	ENOMSG	No message of desired type
43	EIDRM	Identifier removed
44	ECHRNG	Channel number out of range
45	EL2NSYNC	Level 2 not synchronized
46	EL3HLT	Level 3 halted
47	EL3RST	Level 3 reset
48	ELNRNG	Link number out of range
49	EUNATCH	Protocol driver not attached
50	ENOCSI	No CSI structure available
51	EL2HLT	Level 2 halted
52	EBADE	Invalid exchange
53	EBADR	Invalid request descriptor
54	EXFULL	Exchange full
55	ENOANO	No anode
56	EBADRQC	Invalid request code
57	EBADSLT	Invalid slot
59	EBFONT	Bad font file format
60	ENOSTR	Device not a stream
61	ENODATA	No data available
62	ETIME	Timer expired
63	ENOSR	Out of streams resources
64	ENONET	Machine is not on the network
65	ENOPKG	Package not installed
66	EREMOTE	Object is remote
67	ENOLINK	Link has been severed
68	EADV	Advertise error
69	ESRMNT	Srmount error
70	ECOMM	Communication error on send
71	EPROTO	Protocol error
72	EMULTIHOP	Multihop attempted
73	EDOTDOT	RFS specific error
74	EBADMSG	Not a data message
75	EOVERFLOW	Value too large for defined data type
76	ENOTUNIQ	Name not unique on network
77	EBADFD	File descriptor in bad state
78	EREMCHG	Remote address changed
79	ELIBACC	Can not access a needed shared library
80	ELIBBAD	Accessing a corrupted shared library
81	ELIBSCN	.lib section in a.out corrupted
82	ELIBMAX	Attempting to link in too many shared libraries
83	ELIBEXEC	Cannot exec a shared library directly
84	EILSEQ	Illegal byte sequence
85	ERESTART	Interrupted system call should be restarted
86	ESTRPIPE	Streams pipe error
87	EUSERS	Too many users
88	ENOTSOCK	Socket operation on non-socket
89	EDESTADDRREQ	Destination address required
90	EMSGSIZE	Message too long
91	EPROTOTYPE	Protocol wrong type for socket
92	ENOPROTOOPT	Protocol not available
93	EPROTONOSUPPORT	Protocol not supported
94	ESOCKTNOSUPPORT	Socket type not supported
95	EOPNOTSUPP	Operation not supported on transport endpoint
96	EPFNOSUPPORT	Protocol family not supported
97	EAFNOSUPPORT	Address family not supported by protocol
98	EADDRINUSE	Address already in use
99	EADDRNOTAVAIL	Cannot assign requested address
100	ENETDOWN	Network is down
101	ENETUNREACH	Network is unreachable
102	ENETRESET	Network dropped connection because of reset
103	ECONNABORTED	Software caused connection abort
104	ECONNRESET	Connection reset by peer
105	ENOBUFS	No buffer space available
106	EISCONN	Transport endpoint is already connected
107	ENOTCONN	Transport endpoint is not connected
108	ESHUTDOWN	Cannot send after transport endpoint shutdown
109	ETOOMANYREFS	Too many references: cannot splice
110	ETIMEDOUT	Connection timed out
111	ECONNREFUSED	Connection refused
112	EHOSTDOWN	Host is down
113	EHOSTUNREACH	No route to host
114	EALREADY	Operation already in progress
115	EINPROGRESS	Operation now in progress
116	ESTALE	Stale NFS file handle
117	EUCLEAN	Structure needs cleaning
118	ENOTNAM	Not a XENIX named type file
119	ENAVAIL	No XENIX semaphores available
120	EISNAM	Is a named type file
121	EREMOTEIO	Remote I/O error
122	EDQUOT	Quota exceeded
123	ENOMEDIUM	No medium found
124	EMEDIUMTYPE	Wrong medium type
125	ECANCELED	Operation Canceled
126	ENOKEY	Required key not available
127	EKEYEXPIRED	Key has expired
128	EKEYREVOKED	Key has been revoked
129	EKEYREJECTED	Key was rejected by service
130	EOWNERDEAD	Owner died
131	ENOTRECOVERABLE	State not recoverable

=============================================
[Fopen]

#include

FOPEN : FILE * fopen(const char * path,const char * mode); 
Example : 
FILE *input;                                                                                                                    
input=fopen(FILE_PATH,"r");
if ( input==NULL ) 
{
    fprintf(stderr, "Open file:%s fail!", FILE_PATH);
    return;
}

===============================================================

FCLOSE : int result fclose(FILE*);
Example : 
input = fopen(FILE_PATH,"r");
fclose(input);

===============================================================

FREAD : fread(void *buffer,int num_byte,int count,FILE *fp);
Example : 

FILE *input;

int result;

char * buffer;

input = fopen(FILE_PATH,"r"); 

if ( input == NULL ) 

{ 

     fprintf(stderr, "Open file:%s fail!", FILE_PATH); 

     return; 

} 

result = fread (buffer,1, Size,input ); 

if (result == -1) 

{

    printf("File read error!!!"); 

    fclose (pFile); 

    return -1; 

} 

fclose (input); 

return 0;

/* FreeRTOS若無file system 要使用fread 之替代方案 */

uint32_t copy_data(uint8_t *data ,uint32_t data_len)
{
uint32_t size = 0;
uint32_t i;
//memset(data,0,data_len);
for(i = 0; i < data_len; i++)
{
data[i] = bt_binData[i + copyIndex];
size++;
}
copyIndex = copyIndex + size;
PRINTF("copyIndex=%d", copyIndex);
return size;
}

===============================================================


FWRITE : fwrite(void *buffer,int num_byte,int count,FILE *fp);
Example : 



FSCANF : fscanf(FILE *fp, constchar* format, [argument ... ]);
用途 : 從檔案讀取數據到宣告的容器中。 
Retrun type : 回傳讀入個數，錯誤回傳-1(EOF)。  
Example :                                                                                                               

int main(void)
{
    char a1[20], a2[20];
    FILE *input;
    input=fopen(FILE_PATH,"r");
    if (input==NULL) 
    {
        fprintf(stderr, "Open file:%s fail!", FILE_PATH);
        return -1;
    }
    fscanf(input, "%s%s", a1, a2);
    fclose(input);
    printf("%s %s\n", a1, a2);
    return 0;
}

FSEEK : 


FPRINTF :  



Extend from : ext2_io.h
Type : Embeded C
OPEN
int write_device_node(char* node, char* value)
{
  int fd = open(node, O_RDWR);
  if(fd<0 nbsp="" p="">  {
          printf("open %s for write failed\n", node);
          return -1;
   }
    int ret = write(fd, value, strlen(value));
    close(fd);
    return ret;
}